- One Project Closer - http://www.oneprojectcloser.com -
Ridgid 12V JobMax Tool System Review (w/ Multi-Tool & Ratchet Head Attachment)
Posted By Fred On November 29, 2010 @ 6:00 am In Tools | 6 Comments
We’re big fans of multiple purpose tool systems. They save space in toolboxes and storage cabinets, are easier to tote around, and are generally less expensive than buying the individual tools they duplicate. The only potential drawback to tool systems is that they sometimes fail to perform as well as a single purpose tool for the same job. This happens because trades have to be made in the design to accommodate all of the different attachments and hand motions the tool might need to perform.
Earlier this year, Ridgid released the JobMax 12v Li-Ion System into the competitive market of small cordless tools. The JobMax is designed to replace five traditional tools: (1) a right angle drill; (2) an oscillating tool (also called a “multi-tool” itself); (3) an automatic hammer; (4) an impact driver; and, (5) a 3/8″ ratchet.
The JobMax comprises a relatively straightforward design. The body of the tool houses an electric, variable speed 12V motor, ergonomic trigger, and forward/reverse switch. On one end of the body, a rechargeable 12V lithium ion battery snaps into place. On the other, one of five heads connects to a tool-free quick connect interface. The heads can be oriented into 4 positions, each spaced 90 degrees apart to allow for flexibility in the orientation of your hand vs. the work target.
Ridgid provided us a test kit of the JobMax System that included the oscillating multi-tool head and the ratchet head. Our review is limited to these two tools. For a review of all five attachments, Popular Mechanics  compares the JobMax tool (favorably) to many of the single purpose tools it competes with.
Our findings are similar to theirs. We think Ridgid has created a solid multiple purpose tool in this crowded competitive space. Read on for our full review.
The Highs: Good as both a ratchet and oscillating tool; excellent ergonomics; very solid feel and good weight; variable speed motor & trigger; tool-free quick connect interface for changing heads; LED light; organized carrying case.
The Lows: No plug-in option; no trigger lock-on; multi-tool vibrates a bit more than our plug-in versions under the same application.
The Verdict: Ridgid delivers very solid value in the JobMax. We recommend it.
Ergonomics: The first thing you’ll notice about the JobMax as you unpack the tool from its box is its excellent weight and balance. Snap the 12 volt battery in one end and put the oscillating tool on the other, and the tool is perfectly weighted with a center of gravity near the front of the trigger. This weighting inspires confidence, making it easy to direct the business end of the JobMax right where you want it.
The weight and balance are complemented by the no-slip surface that makes the Ridgid feel like its glued to your hand… in a good way. Competitors could take a lesson in ergonomics from this tool… The grip is every bit as nice as the Bosch Jigsaw  we tested two weeks ago.
The trigger on the JobMax is excellent. Power increases steadily through the travel and it is easy to set and hold a certain power level. Resistance seems to be just right. The tool doesn’t accidentally turn on while you’re holding it, yet it won’t fatigue your trigger finger after hours of use.
Oscillating Tool: We used the oscillating tool to make cuts deep into dimensional 2×4 lumber (it was readily available for our test). This is the third oscillating multi-tool we’ve tested this year (the other two were the Sonicrafter  and the Multimax , both corded models). The Ridgid performed as well as both of these powered models. A notable difference, though, is how the Ridgid controls speed.
On the Sonicrafter and Multimax, you set the speed using a dial, which allows for a very deliberate choice. On the Ridgid, you must control the speed with the trigger. It’s fairly easy to hold a selected speed, but unlike the competition, you can’t precisely duplicate a cutting speed based on a cutting recommendation from a manufacturer or expert. Also, on the Ridgid, you must keep the trigger pulled, whereas the Sonicrafter and MultiMax have a set on/off switch.
About the only performance difference we noticed between the Ridgid and the corded competition was slightly higher vibration from the Ridgid. This is likely due to the quick connect drive shaft the Ridgid needs to facilitate interchangeable heads. This wouldn’t be a show stopper for us as it wasn’t extreme, but it might be an annoyance for a woodworker who uses a multi-tool on a regular basis.
The oscillating tool head comes with a variety of cutting and sanding blades, similar to what ships with competitor products. You change the blade with an included hexagonal key. It would be great if this key could be permanently attached to the tool or tool head, since all of the JobMax kits include the oscillating tool standard.
Ratchet Tool: The ratchet tool works just as advertised. We were surprised at how muted the vibration is compared to the oscillating tool. The ratchet provides up to 250 in. lbs. of torque (about 21 ft. lbs). It’s no replacement for an impact wrench or even a manual ratchet, but it will work for many common assembly/disassembly tasks. For places where you need the bolt tighter, this could take the arm work out of most of the tightening before you switch to a manual ratchet.
The ratchet includes a 3/8″ to 1/2″ adapter so it can be used with 1/2″ sockets.
Batteries & Charging System: Batteries are 12V, 17 watt-hour and quick-charge in 30 minutes (a nice plus). Only one battery is included in the starter kit for the JobMax. You can purchase additional batteries (and we think one more makes a lot of sense, so you can charge while you work). Battery life is on par with the competition in the 12V space – especially with the tools that Ridgid competes with. We’re still yearning for the battery that lasts the whole work day, though.
Extras: All of the JobMax starter kits come with a deluxe carrying tote. We prefer soft-side totes as opposed to molded plastic because they are easier to carry and take up less space. The only limitation of this tote is that if you happen to own all 5 attachments for the JobMax, they won’t have individual storage straps (you’ll end up just throwing them all in the bag).
After using this tool on a few tasks, we really think Ridgid has a winner. This would make a great gift for the holidays or really any occasion.
Ridgid woodworkers tools are sold exclusively at Home Depot.
Starter combo kits begin at $99.00 and include the oscillating tool head and one other head (any of the 4) with a battery and charger station.
You can also purchase the JobMax with the oscillating tool head and a separate Ridgid 12 volt lithium ion drill driver that takes the same battery. This package costs $159.00. The bonus with this kit is you get an extra battery. Unfortunately, you don’t get the extra head. JobMax heads are $50.00 each.
Article printed from One Project Closer: http://www.oneprojectcloser.com
URL to article: http://www.oneprojectcloser.com/ridgid-12v-jobmax-tool-system-review-w-multi-tool-ratchet-head-attachment/
URLs in this post:
 Popular Mechanics: http://www.popularmechanics.com/home/reviews/power-tools/ridgid-jobmax-versus-the-world
 Bosch Jigsaw: http://www.oneprojectcloser.com/bosch-js470e-jig-saw-review/
 Sonicrafter: http://www.oneprojectcloser.com/rockwell-sonicrafter-oscillating-multi-tool-review/
 Multimax: http://www.oneprojectcloser.com/dremel-multi-max-review-dremel-multi-tool/
Copyright © 2011 One Project Closer. All rights reserved.