- One Project Closer - http://www.oneprojectcloser.com -

What is Blind Nailing in Hardwood Floor Installations?

Posted By Fred On July 8, 2010 @ 11:00 am In Flooring | 7 Comments

In our review of the DuoFast Floormaster 250BN [1] we make substantial reference to the term blind nailing when describing fastening the first few and last few hardwood boards in place. If you’ve never heard the term blind nailing, you’re probably wondering what exactly it means.

Blind nailing is setting a nail into the hardwood flooring board at a 45 degree angle, just above the tongue of the board and driven down into the joist or subfloor surface. In olden times, blind nailing was done with a hammer to start the nail, then as a woodworker got close to the wood, a nailset was used with the hammer to countersink the nail into the material.  The technique hides the nail as the next board is installed.

In hardwood installations today, we’re blessed with pneumatic tools that take much of the hard manual labor out of the job.  Just about any finish nailer can be used for blind nailing. One of the notable features of the Floormaster 250BN that DuoFast sent us is that it comes pre-loaded with a 45-degree angled tip to support accurate blind nailing. (You’ll immediately recognize this as a nice feature if you’ve ever tried to blind nail hardwoods using a flat tip).

what-is-blind-nailing

It’s worth noting that technically an entire modern-day floor is blind nailed, but not all with the same tool. Most of the floor is installed with a hardwood flooring stapler [2] or nailer, specifically designed for blind nailing boards.  This tool is sometimes called a toe nailer. Hardwood installers generally reserve the term blind nailing for the first few and last few boards that must be installed with a finish nailer because the larger hardwood flooring tool won’t fit.

Other Meanings for Blind Nailing

Beyond working on flooring, blind nailing can refer to hiding a nail beneath a chip of wood, as described in this article [3], which is a pretty slick woodworking trick.

More Information on Hardwood Flooring

This article is part of our How to Install Hardwood Flooring [4] series – a set of articles that describes all the steps necessary to install wood floors.  Click that link for more information.


Article printed from One Project Closer: http://www.oneprojectcloser.com

URL to article: http://www.oneprojectcloser.com/what-is-blind-nailing-in-hardwood-floor-installations/

URLs in this post:

[1] DuoFast Floormaster 250BN: http://www.oneprojectcloser.com/duofast-floormaster-250bn-blind-finish-nailer-review/

[2] hardwood flooring stapler: http://www.oneprojectcloser.com/hardwood-flooring-stapler-review-the-duo-fast-200-s/

[3] this article: http://www.woodworkingtips.com/etips/etip41.html

[4] How to Install Hardwood Flooring: http://www.oneprojectcloser.com/how-to-install-hardwood-flooring/

Copyright © 2011 One Project Closer. All rights reserved.